The salinometer measures and supervises the salinity (salt content) by conductivity measurement in fresh water. The measured value is displayed as ppm and by comparing the measured value to a user defined alarm setpoint value, relay outputs are available to indicate if salinity is above or below the alarm setpoint value.
In areas where fresh water generation or purification is taking place and level of salinity in the fresh water must be monitored as well as in areas where a set level of salinity is requested in a process. Salinometers are used in: Freshwater Generators, Boilers, Reversed Osmosis Fresh Water Systems (RO) and other systems where salinity has to be supervised.
85 - 265 V AC, 50/60 Hz, 10 VA typ. - 15 VA max. Mains supply must be protected against overcurrent by an external 250 mA slow-blow fuse.
User defined alarm setpoint value (0 - 199 ppm) is set using "+" and "-" buttons. When measured value axceeds alarm setpoint, change-over relay contacts A and B are activated. Alarm relay B may be enabled/disabled from the front by pressing a button.
Beurtschipperstraat 1
3194 DK Hoogvliet
The Netherlands
+31 (0) 10 295 2740
sales-mo.sd.nl@draeger.com